شرح طريقة تفليش هاتف firmware Lenovo A1010a20 بدون بوكسات
اذا كان لديك هاتف لينوفو a1010a20 وبه بعض المشاكل مثل توقف الجهاز علي شعار Lenovo
اليوم بأذن الله هنشرح طريقة ’’تفليش‘‘ عمل سوفت وير لهاتف Lenovo A1010a20 وايضا طريقة حل جميع مشاكل الهاتف .
تحذير ’’هام’’ | عملية التفليش علي سؤليتك الشخصية وفريق عمل موقع برامج التطويرية لا يتحمل اي ضرر قد يصيب جهازك نتيجة الاستخدام الخاطئ .
طريقة التفليش التالية خاصة بهاتف Lenovo A1010a20 والصورة التالية توضح بينات الهاتف
متطلبات العمل :
التعريفات + ملف الروم + البرنامج المستخدم | قم بتحميلهم من الرابط التالي | تم الرفع علي موقع [mediafire] باسورد فك الضغط | www.egpr.net
قم بفك الضغط عن الملف باذن الله تجد بداخلها اربع ملفات نحتاج فقط لثلاثة تعريفات usb ملف الروم والبرنامج المستخدم Sp-Flash-Tool
How To Flash Lenovo A Plus A1010a20
First, you need to download and install SP flash tool
Download and install MTK android USB drivers
Then download Firmware file/Flash file/Rom for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
تابع ايضا | شرح طريقة استرجاع رمز imei لهاتف Lenovo A1010a20
الشرح | تابع عملية التفليش من خلال الفيديو التالي :
شرح طريقة تفليش هاتف firmware Lenovo A1010a20 بدون بوكسات
Leave a Reply